2017-01-19 :

GSX Services are facing issues. Down/Unstable Worldwide..

  |   2017-01-13 :

WE WILL OFFER NEAR COST PRICING FOR CUSTOMERs WHO add credits by BANK TRANSFER OR DEPOSIT. We will pass those savings to you..!!

  |   2016-10-18 :

Attentions GSX. when checking GSX for locked/unlocked status, please ignore the lock status at the botton of the gsx report. Always refer to Next Tether Activation Policy. If on next tether says multi mode unlock or unlock, device is unlocked 100%. If it says the original carrier, then still is locked!

  |  

How to enter free unlock code on your mobile cell phone

Alcatel:
 

How to Unlock Alcaltel:

 Turn on your phone without a SIM card

    Compose: *#0000*CODE# and the unlock code provided
    Then Compose: *#0001*CODE# and the unlock code provided
    Your phone is unlocked!

 OR

 Turn on your phone with a non accepted SIM card

    Phone will prompt for the unlock code
    Enter the unlock code provided
    Your phone is unlocked!

   How to Unlock Alcatel 531 & 535

 Switch ON your phone without SIM Card inserted,

    Press * and without releasing type 787292,
    A new menu "Unlock Network" will appear, then select "YES",
    Enter the Code.


Blackberry:
 

 Read This First

 * With the provided Unlock codes, if you are receivng "Code Error",  DO NOT WORRY!  proceed to the end of the page to the "Trouble Shooting" section on how to proceed.

 * DO NOT use all of the attempts to enter the Unlock code otherwise your phone will be Hardlocked (MEP 0),  Contact us First  if you have less than 5 tries left to enter the Unlock Code.
* Video proof will be required if code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device.
 
There are Multiple Unlock Codes Above, which One is it?
.
If you only received 1 Unlock Code, Don't worry about this part, use the code provided above. Or if the Unlock Codes above contain the words "Preferred" OR  "Other Codes" try using those codes first.
 
* Unlock Code is Normally the NCK Code or MEP2 code
.
The MEP2 Code is the Second Set of Number! MEP4 is the Fourth Set of Numbers!
.
Example:

SIM Code ...: XXXXXXXXXXXXXXXX.......... MEP1
NCK Code ...:  XXXXXXXXXXXXXXXX .......... MEP2  <== Network Unlock Code (MEP2)
Subset Code :  XXXXXXXXXXXXXXXX .......... MEP3
Prov Code ..:  XXXXXXXXXXXXXXXX .......... MEP4   <== Service Provider Code (MEP4), if required only
Corp Code ..:  XXXXXXXXXXXXXXXX .......... MEP5
 
OR
.
..... SIM Code ...: XXXXXXXXXXXXXXXX.......... MEP1 NCK Code ...: XXXXXXXXXXXXXXXX.......... MEP2 Subset Code : XXXXXXXXXXXXXXXX.......... MEP3 Prov Code ..: XXXXXXXXXXXXXXXX.......... MEP4 Corp Code ..: XXXXXXXXXXXXXXXX.......... MEP5
.
* Some Blackberry phones need the  Prov Code or MEP4  (Service Provider) code, normally  Telus, Koodo, and Bell Blackberrys.
.
Code Input Instructions

How to Enter the Unlock Code into my Blackberry?
 
How to Enter Unlock Codes on BlackBerry (Most Models)

1) Start the phone on with a Non accepted simcard in the phone
2) On the main menu,  Go to settings  
3) Go to advanced options, then simcard.
4) Type MEPD (you can't see anything typed on your screen)
5) Type in MEP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say "Code Accepted"
7) Phone is now unlocked
.
OR
.
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Type in MEP, hold ALT and press 2, another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key
.
OR
.
1) Start the phone on with a Non accepted SIM card in the phone
2) Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3) Click yes, and input the 8 or 16 digit Unlock code sent to you
4) Phone is now unlocked.
.
Alternative Blackberry Code Input Instructions
How to Enter Unlock Codes on BlackBerry Curve 9320
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Hold ALT, then type in MEP2 while holding alt; another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key
 
How to Enter Unlock Codes on BlackBerry Bold 9900/9930, 9850/9860, 9360/9370/9380

1) Start the phone on with a Non accepted simcard in the phone
2) Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3) Click yes, and input the 8 or 16 digit Unlock code sent to you
4) Phone is now unlocked
.
How to Enter Unlock Codes on BlackBerry Bold 9700, Curve 8520,83xx
 
1) Start the phone on with a Non accepted simcard in the phone,
2) On the main menu,  Go to settings  
3) Go to advanced options
4) Type MEPD (you can't see anything typed on your screen)
5) Type in MEP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say "Code Accepted"
7) Phone is now unlocked

How to Enter Unlock Codes on BlackBerry Torch 9800/9810, Bold 9780, Curve 93xx

1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Type in MEP, hold ALT and press 2, another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key

How to Enter Unlock Codes on BlackBerry Storm 9550/9530, Tour 9630, Bold 9650

1) Need a Non accepted SIM card inserted into the phone (any simcard not from the original carrier)
2) Go to Options, then Mobile Network Settings, Technology, change it to GSM/UMTS.
3) Go to Settings Menu, Options, Advanced Options and then SIM Card.
4) Hit the menu button and select show keyboard
5) Type in mepd using the keyboard (nothing will show on screen)
6) Type in mep2 another screen pops up for the code
7) Enter the code, remember you ONLY have 10 chances to get it right
8) Press the enter key
9) A message will appear saying code accepted
10) Turn device off, insert SIM of your choice if have not done so already
11) Turn the phone back on, you should be able to make calls.

How to Enter Unlock Codes on BlackBerry Pearl 91xx - 81xx
 
1) Start the phone on with a Non accepted simcard in the phone, and Go to settings
2) On the main menu,  Go to settings  
3) Go to advanced options
4) Type MEPPD (you can't see anything typed on your screen)
5) Type in MEPP, hold ALT and press 2, another screen pops up for the code
6) Input the 8 or 16 digit Unlock code sent to you, it will say "Code Accepted"
7) Phone is now unlocked
.
How to Enter Unlock Codes on BlackBerry CDMA Devices (SPC / MSL Code)
 
1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear
How to Enter Unlock Codes on BlackBerry Z10
 
1) Insert a non accepted simcard and power phone on.
2) Go to Settings > Security and Privacy > Simcard
3) Press “Unlock Network”
4) Enter the 8 or 16 digit code
*If you received a 16 digit code and you are receiving an error, use the first 8 digits of the 16 digit code.
 
How do I know my Phone is Fully Unlocked?
 
On your phone, go to "Simcard", press "MEPD".  You will see:
SIM: Disabled
Network: Disabled / Inactive
Network Subset: Disabled
Service Provider: Disabled
Corporate: Disabled

*If everything is disabled or inactive, your phone is fully unlocked
 
 Trouble Shooting
 
"Code Error" What do I do?
 
Please DO NOT WORRY!
 
1. Go to options and then status, and check IMEI number with decimals included.
2. Find us your phone's PRD number (on the back of the phone looks like PRD-XXXXX-XXX)
.
*Please reply to this email with the 2 information requested, we will respond ASAP
.
OR
.
Get us your Blackberry Phone's Information:
.
To find your Phone's MEP we  have two methods of getting this:

MEP method 1 ( easiest, but will require a datacable for this)

Please download this software and reply back with the information that is produced from the software

Step 1: Download the logger —> http://www.mediafire.com/?jixdxfbmytd

Step 2: Connect your Blackberry to computer using original USB cable

Step 3: Start BB-Server Blackberry Logger and click Read Blackberry Handset Info

Step 4: You will see your phone's information from the Logger

Copy and paste the information and reply back to us.
 
My Phone displays  "MEP 0" What is this?

 This means your phone is hardlocked and has no more attempts to Unlock your device.  At this point there are no alternatives to unlock this device.

 I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked. Also keep in mind, if your phone cannot use BBM, or other Blackberry services, Black devices need a special "Blackberry Dataplan" which you can get from your service provider

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.


Blackberry 10


* With the provided Unlock codes, if you are receivng "Code Error", DO NOT WORRY! proceed to the end of the page to the "Trouble Shooting" section on how to proceed.

* DO NOT use all of the attempts to enter the Unlock code otherwise your phone will be Hardlocked (MEP 0), Contact us First if you have less than 5 tries left to enter the Unlock Code.

* Video proof will be required if code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device.

There are Multiple Unlock Codes Above, which One is it?

The code is always 8 or 16 digits. If there are two sets, try them in order

If 16 digit code is giving error, use the first 8 digits of the 16 digit code

Caution! if you have less than 5 attempts left contact us first!

If you only received 1 Unlock Code, Don't worry about this part, use the code provided above. Or if the Unlock Codes above contain the words "Preferred" OR "Other Codes" try using those codes first.

  Code Input Instructions

How to Enter the Unlock Code into my Blackberry?

1. Insert a non accepted simcard and power phone on.

2. Go to Settings > Security and Privacy > Simcard

3. Press "Unlock Network"

4. Enter the 8 or 16 digit code (If 16 digit code is giving error, use the first 8 digits of the 16 digit code)

Phones is now Unlocked!


Trouble Shooting

"Code Error" What do I do?

Please DO NOT WORRY!

If you received a 16 digit code, use the first 8 digits of the 16 digit code.

Caution! if you have less than 5 attempts left contact us first!


My Phone displays "MEP 0" What is this?

This means your phone is hardlocked and has no more attempts to Unlock your device. At this point there are no alternatives to unlock this device.


I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings. The APN settings vary depending on the service provider you are trying to use. Please contact your service provider and they can assist you setting this up. There is no separate unlock for data or internet. If you can call or text, your phone's network is fully unlocked. Also keep in mind, if your phone cannot use BBM, or other Blackberry services, Black devices need a special "Blackberry Dataplan" which you can get from your service provider

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you. You can contact your service provider to get it.

 

Dell:

 

Instructions

Read This First
.
* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Dell is an Android device.

* Video proof will be required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!


Code Input Instructions


1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!


Trouble Shooting


"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn't work.  If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.


I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked.

 
My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.

 

Garmin

 

 Instructions

Read This First

* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Garmin
is an Android device.

* Video proof maybe required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!


Code Input Instructions


1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!


*Although you are able to enter the code without inserting a Non-accepted simcard with some Garmin devices, you MUST use a non accepted simcard to enter the unlock code.


Trouble Shooting


"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn't work.  If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.


I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked.
 

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.


*if you are receiving the message "Incorrect Pin Code 5 tries left"


This is NOT the unlock code, this is your phone's personal password or simcard's password.  You must by pass this first and then enter the network unlock code we have provided you with.


My Phone seems to be unlocked but I'm not getting any signal

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible on their network.  Not all GSM phones are compatible with any Network after unlocking it.  The unlocked phone must be able to support the Network's Frequency.  If you are unsure of this, please contact them regading this.

After unlocking your phone, please pull the battery for a couple minutes and then restart the device.  It may take a few minutes for your phone to pick up the new signal. Also go to your Network settings on your phone, and make sure the device can detect the signal from the simcard you are trying use.


 

HTC

 

Instructions

Read This First

* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your HTC
is an Android device.

* Video proof maybe required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!


Code Input Instructions


1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!


How to enter codes for HTC (Example: Tilt, G1), Pantech (Example: Duo (C810), HP & all


 How to Unlock Telus, Verizon and other CDMA HTC phones

1. Switch to GSM mode
2. Go to Personal
3. Go to Security
4. It will says "Please enter the sim unlock code to disable the SIM lock"
5. Enter unlock code.
6. Reboot.


How to Unlock Verizon Incredible Droids (If No prompt to enter code)


Go to Settings > Security > Disable SIM card lock , Now input the Unlock Code


Trouble Shooting


"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn't work.  If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.


I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked.
 

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.
 

*if you are receiving the message "Incorrect Pin Code 5 tries left"


This is NOT the unlock code, this is your phone's personal password or simcard's password.  You must by pass this first and then enter the network unlock code we have provided you with.

 

Huawei

 

How to Unlock Huawei:

  1. Turn on phone with a non accepted SIM card
  2. Phone will prompt you for unlock code
  3. Enter unlock code and press ok
  4. Your phone is unlocked!

 

iPhone

 

Once you have received the "activated" or "unlocked" message, please follow these instructions carefully.


    Connect phone to iTunes with not accepted (not valid) SIM card
    Wait until iTunes detects phone
    Now disconnect phone and reconnect after 10 seconds
    Phone is Unlocked

OR

    Insert a non accepted SIM card
    Connect phone to iTunes
    Perform a back-up (if necessary) then restore
    iTunes will display "Your Phone is Unlocked"


NOTE : This is the only "lifetime" unlock solution for Apple iPhone as the IMEI is registered as "Unlocked" in Apple database. Your phone will always be unlocked even after each new update of your phone firmware !


Troubleshooting


I received the message "activated" or "unlocked" but when I plug it into iTunes, nothing happens.

- Try connecting to iTunes, perform a back up then restore.


Phone is Jailbroken and will not allow me to do a restore

- You must put your iPhone into whats call "DFU mode".
- Open iTunes and connect the iPhone to your PC/Mac.
- Press and hold the Home button and the Sleep/Wake button at the same time.
- After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode. Now you can do a restore on your iPhone.


* Note: It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long!


Sprint iPhone not Unlocking

- Put unaccepted sim restore unit with 5.1.1 wait untill unit restart fully now you may see phone successfully unlocked

 

LG

 


Read This First

* DO NOT use all attempts to enter the unlock code otherwise your phone will be hardlocked (all phones have at least 10 attempts)
* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your LG is an Android device.

* Video proof will be required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!


There are Multiple Unlock Codes Above, which One is it?

If you only received 1 Unlock Code above, Don't worry about this part, use the code provided above.


Most Carriers use the "NCK" code, you will only require this code which is the first code


* Unlock Code is  the  NCK=xxxxxxxxxxxxxx is the Unlock Code as shown below:

Example:

NCK=xxxxxxxxxxxxxxxx

NSCK=xxxxxxxxxxxxxxxx

SPCK=xxxxxxxxxxxxxxxx

CPCK=xxxxxxxxxxxxxxxx

SIMCK=xxxxxxxxxxxxxxxx


* You can ignore the rest of the codes if the NCK unlocks the phone succesfully.

* If the first code gives your error, use the codes received in order.

* Telus, Bell, Fido, and all other phones requesting the Service Provider code, use the "NSCK" or "SPCK" code or the last code provided

*Note: We may send you more than one unlock code.  Different carriers require a different type of unlock code, however usually it will only be one that is needed.


Code Input Instructions


How to Enter Unlock Codes on all LG Models


Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:


Method #1 Insert a non accepted simcard, and enter code when prompted for a code

OR

Method #2 Go to the dial screen and press “2945#*model number#”

for example if its a p999 you enter “2945#*999#” or if its a p990 you enter “2945#*990#” etc…

OR

Method #3 to the dial screen and press 2945#*71001# as if making a call, enter code when prompted

OR

Method #4 Go to the dial screen and press *#865625# as if making a call, enter code when prompted


If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked


*If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.

 

Motorola

 

 Instructions

Read This First

* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Motorola
is an Android device.

* Video proof maybe required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!

Some Motorola models have a limited amount of tries to enter the code, do not use  all the attempts otherwise your phone will be hardlocked (all phones have at least 10 attempts)

The amount of tries is displayed before you enter the code

If you less than 5 attempts to enter the code, contact us first before entering the code

Video proof will be required if code does not work, it's a good idea to film it so we can help trouble shoot what the problem is.


There are Multiple Unlock Codes Above, which One is it?


If you only received 1 Unlock Code, Don't worry about this part, use the code provided above.


If you receive your code in this format (These numbers are EXAMPLE ONLY) :

ex: "j89eny36td 10740919 51393112 17a08833"

Ignore the letters, you code would be as follows

ex: "j89eny36td 10740919 51393112 17a08833"

code 1: 10740919

or

code 2: 51393112


Code Input Instructions


1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!

* May ask for subsidy code/network code


If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

This is due to the incorrect code being entered too many times.  Leave the phone ON at this error message for about 30 mins-4 hours and the message "Enter Code Special" will appear again!


How to Enter Unlock Codes on Motorola CDMA Devices (SPC / MSL Code)

1) From the mainscreen of the Motorola, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear

Trouble Shooting


"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn't work.  If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.


I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked.
 

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.


*if you are receiving the message "Incorrect Pin Code 5 tries left"


This is NOT the unlock code, this is your phone's personal password or simcard's password.  You must by pass this first and then enter the network unlock code we have provided you with.


My Phone seems to be unlocked but I'm not getting any signal

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible on their network.  Not all GSM phones are compatible with any Network after unlocking it.  The unlocked phone must be able to support the Network's Frequency.  If you are unsure of this, please contact them regading this.

After unlocking your phone, please pull the battery for a couple minutes and then restart the device.  It may take a few minutes for your phone to pick up the new signal. Also go to your Network settings on your phone, and make sure the device can detect the signal from the simcard you are trying use.


Alternative Code Input Instructions



Motorola Atrix Unlock instructions (no simcard):

1) As if making a call type #786074*
2) Enter Unlock code


If your phone is a 3G phone (ie. z8):
 
On the home screen/lock message, enter **057*

Unlock Instruction for Motorola Milestone

1) Power ON your phone  with different SIM Card then the phone is locked to
2) Type *#32# and then Press OK
3) Enter UNLOCK CODE
4) Device is now unlocked

If your phone is not prompting you to enter a code and are receiving a message  "Cell phone is blocked, please contact service provider"

1) As if making a call press #073887*
2) Enter unlock code provided
Motorola A956 (Droid 2) unlock ins
tructions:

1) Make sure Network Mode is set to GSM/UTMS
2) To enter the unlock code for motorola, phone, insert a foreign / unaccepted sim card and enter the unlock code.
* If your phone appears on the "Contact operator" or the inability to enter the code should leave the phone with a foreign sim card for about 30 minutes. After this time you are allowed to enter the code.

 

Nokia Lumia

 

Nokia Lumia Series

1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!


OR


Nokia Lumia Series (Brazil)

1. Update the software via the Lumia newest Zune.
On your phone, go to Store (formerly Marketplace), then download and install the application network configuration, which can be found on the Nokia Collection.
2. Turn off your phone and insert non accepted SIM card
3. According to the information from the chip, the application network configuration settings define cellular data connection and MMS service on your phone automatically. Alternatively, you can manually enter the settings for either or both. To start the application, slide your finger left until the application list and select Network Configuration.

Note: The exact name of the application network configuration varies according to the different languages.


For AT&T Nokia Lumia 900 Invalid Code Message:


If the Unlock Code provided is asking saying error, please continue to enter the unlock code provided until the phone asks for the "PUK" code.  Please do not worry about the attempts remaining.  Once you have diminished all your tries, the phone will ask for the PUK code and this is where you enter the Unlock Code.

 

Pantech

 

Code Input Instructions


1. Turn on phone with a non accepted SIM card
2. Phone will prompt you for unlock code
3. Enter unlock code
4. Your phone is unlocked!

OR

1. Turn on phone with original and/or non accepted SIM card
2. Type *#865625#
3. Phone will prompt for unlock code, enter twice
4. Phone is unlocked!


Samsung

 

Instructions
 
Read This First

* With the provided Unlock codes, if you are receiving "Code Error" or "Sim Network Unlock Unsuccessful,  DO NOT WORRY!  proceed to the "Trouble Shooting" section on how to proceed.
* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Samsung is an Android device.

* Video proof will be required if the Unlock code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device. Just ask us!


There are Multiple Unlock Codes Above, which One is it?

If you only received 1 Unlock Code, Don't worry about this part, use the code provided above.

* Unlock Code is  the  Network=xxxxxxxx is the Unlock Code as shown below:

Example:

NETWORK=xxxxxxxx; PROVIDER=xxxxxxxx; SUBPROVIDER=xxxxxxxx; DEFREEZE=xxxxxxxx

* You can ignore the rest of the codes, unless you are receiving a "Phone Freeze" message when trying to input the Unlock Code.

 
Code Input Instructions


How to Enter Unlock Codes on all Samsung Models


Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:


Method #1 Insert a Non accepted SIM card in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code

Note: Non Accepted Simcard is any simcard not from the original provider

OR

Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)

OR

Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)

OR

Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.


If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked

 

*If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.


How to Enter Defreeze Code for "Phone Freeze" Samsung Devices (only if your Samsung is Hard locked)

1.Input a non-accepted simcard into the phone.
2.Proceed to the dial screen.
3.Enter the defreeze code (Freeze code) and press enter, or okay.
4.The screen should now ask for the unlock code (Network Code).  Enter the 8 digit unlock code and hit enter.

OR

1. Turn phone on with an unaccepted simcard
2. Screen will display “Phone is freeze / SOS”
3. Type the unfreeze code (Nothing will show on screen)
4. Hit the “Enter Button”
5. Phone will ask for the Network lock code
6. Enter it as you have received it
7. Phone will be unfreeze and unlocked


How do I know my Phone's Network is Fully Unlocked?

Go to the dial screen on your phone, and press *#7465625#
 
A menu will be displayed that will resemble the following...

1. [ ] Network lock
2. [ ] Subset lock
3. [ ] SP lock

If everything if OFF, then your phone is fully unlocked.

 

Sony/Sony Ericsson

2017-01-19 :

GSX Services are facing issues. Down/Unstable Worldwide..

  |   2017-01-13 :

WE WILL OFFER NEAR COST PRICING FOR CUSTOMERs WHO add credits by BANK TRANSFER OR DEPOSIT. We will pass those savings to you..!!

  |   2016-10-18 :

Attentions GSX. when checking GSX for locked/unlocked status, please ignore the lock status at the botton of the gsx report. Always refer to Next Tether Activation Policy. If on next tether says multi mode unlock or unlock, device is unlocked 100%. If it says the original carrier, then still is locked!

  |